1. Prepare the Surface
-
Remove any excess material or debris for easier cleaning.
2. Product Application
-
Apply the material with a mop, scrubber, etc.
-
Dilution-Light Dirt: add 1 ounce of CleanEase Li™ per gallon of water in mop bucket or automatic scrubbing machine. ​Dilution-Heavy Dirt: Add 2 ounces of CleanEase Li™ per gallon of water in mop bucket or automatic scrubbing machine. *Let solution stay on the surface for 5-10 minutes.
-
Scrub with brush to loosen dirt.
-
Pick up dirty water and rinse with clean water.
-
Apply the CleanEase Li™ as often as the surface warrants.
3. Clean Up
-
Rinse mop or flush scrubber with warm water
Apply
Coverage
Apply as needed
Drying Time
As soon as the surface dries
Storage & Disposal
Do not freeze
Periodic Maintenance
CleanEase Li should be used as often as the surface warrants
Full Instructions
Equipment
-
Walk-behind Auto Scrubber or
-
Mop & Bucket
Needed for Application
SealSource recommends discussing a customized maintenance program with our Technical Department.
Use CleanEase Li™ with SealSource Diamond Pads for a proper maintenance program.
Can be used, but is not limited to the following areas: concrete floors, brick, split-faced block, stucco, tile, etc.